B-52 Data Interface Unit/Data Transfer Receptacle (DTR) - Buy and Repair F3I DTR

Sources Sought from Fa8539 Afsc Pzaba. Responses are due Nov 23, 2026 (3 days left).

Open to all (no set-aside)Any registered business can bid, large or small.Who qualifies
  • 3Days left to respond
  • 34 daysThis buyer usually gives
  • 0%Notices this buyer changes
  • -Typical award from this office

What BidCamel found about this buyer

  • This office usually gives bidders 34 days to respond; this notice gives 32 days.
  • It changed 0% of its 6 notices after posting, so check for amendments before you submit.
  • It has 2 open bids right now. See them all.
  • We have no past awards from this office yet.
Key details
Solicitation number
FA8539-7025-01-738-4504(F3I)
NAICS code
811210 811210
Size standard for this code
34 million dollars in average annual revenue
Set-aside
Open to all (no set-aside)
Buying
Not stated
Place
Robins Afb, GA · Georgia bids
Posted
Oct 22, 2026
Last changed
Oct 22, 2026
Contact
Contact details are on the SAM.gov notice. Open on SAM.gov

Description

B-52 Data Interface Unit/Data Transfer Receptacle (DTR) The Government is conducting market research to identify potential sources with the expertise, capabilities, experience, facilities, and technical capacity necessary to manufacture/provide and repair the B-52 Data Interface Unit/Data Transfer Receptacle (DTR). The National Stock Number (NSN) and Part Number (PN) are as follows: LRU: NSN 7025-01-738-4504AY, P/N P210015K0001-1, INTERFACE UNIT, DATA This Request for Information (RFI) supports a buy and repair requirement for the new Form, Fit, Function, and Interface (F3I) DTR. Kihomac, Inc. is currently manufacturing the F3I DTR under contract SPRWA1-21-D-0015. The Government owns, or will provide under appropriate controls, the manufacturing and technical data necessary to support competitive production and repair of this item. The Government intends to compete this requirement on the open market to obtain new production units and repair services. The legacy B-52 DTR is repaired by Symetrics Industries (CAGE 22830) under contracts FA8539-20-D-0013 and FA8539-25-D-0004. This market research effort pertains to the F3I DTR identified above, currently being manufactured by Kihomac, Inc. under contract SPRWA1-21-D-0015, and is intended to identify sources capable of supporting competitive manufacture and repair using Government-owned technical data. The DTR is a Line Replaceable Unit (LRU) on the B-52 aircraft, with two DTRs installed per aircraft. The DTR transfers Offensive Avionics System (OAS) information to and from storage on the Data Transfer Cartridge (DTC) across its interface with the Fibre Channel or MIL-STD-1553A data bus system. Additionally, the DTR provides status over the MIL-STD-1553A and Fibre Channel buses indicating that the DTC is successfully installed. The required scope shall include, as applicable, manufacture and delivery of new production DTR units; hardware repair and return of unserviceable DTR units; obsolete parts resolution; engineering support to investigate Deficiency Reports (DRs); Diminishing Manufacturing Sources and Material Shortages (DMSMS) support; development, maintenance, and execution of required inspection, test, and acceptance procedures; and configuration management support to ensure newly manufactured and repaired units conform to the applicable Government-furnished technical data package. All newly manufactured and repaired units must meet applicable form, fit, function, and interface requirements. The contractor shall furnish all necessary material, support equipment, tools, test equipment, facilities, and services required to perform the work. The contractor is responsible for acquiring, maintaining, and calibrating all support equipment required at its primary or subcontractor facilities. Contractor-furnished material or replacement parts must equal or exceed the quality, tolerances, and specifications identified in the applicable technical data package. INSTRUCTIONS: 1. The document(s) below contain a description of the NSN listed for buy and repair requirements and a Contractor Capability Survey. The Survey allows Contractors to provide their company’s capability. 2. If, after reviewing these documents, you wish to participate in this market research, you should provide documentation demonstrating your company's capability to meet these buy and repair requirements. Failure to provide adequate documentation may prevent the government from properly assessing your capabilities. If you lack sufficient experience in a particular area, please explain how you would overcome this deficiency to fulfill the requirement (e.g., through teaming or subcontracting). a. Identify any specific areas of work that your organization believes should be set aside exclusively for Small Business. 3. Both large and small businesses are encouraged to participate in this Market Research. Joint ventures or teaming arrangements are encouraged. 4. Questions regarding this market survey should be addressed to Tyler Martens, Program Manager, 478-955-5165 or via email at [email protected]. DISCLAIMER: This Request for Information is for market research and planning purposes only. This is not a request for proposal, does not constitute a solicitation, and shall not be construed as a commitment by the government to award a contract. Responses to this RFI are not offers, and the Government is under no obligation to award a contract as a result of this announcement. The Government will not pay for any costs associated with the preparation or submission of responses. Any information submitted by respondents is strictly voluntary. CONTRACTOR CAPABILITY SURVEY B-52 Data Interface Unit/Data Transfer Receptacle (DTR) Part I. Business Information Please provide the following business information for your company/institution and for any teaming or joint venture partners: • Company/Institute Name: • Address: • Point of Contact: • CAGE Code: • Phone Number: • E-mail Address: • Web Page URL: • Size of business pursuant to North American Industry Classification System (NAICS) Code: NAICS Code 811210 – Electronic and Precision Equipment Repair and Maintenance Based on the above NAICS Code, please indicate whether your company is a: • Small Business (Yes / No) • Woman Owned Small Business (Yes / No) • Small Disadvantaged Business (Yes / No) • 8(a) Certified (Yes / No) • HUBZone Certified (Yes / No) • Veteran Owned Small Business (Yes / No) • Service Disabled Veteran Small Business (Yes / No) • System for Award Management (SAM) (Yes / No) • A statement as to whether your company is domestically or foreign owned (if foreign, please indicate the country of ownership). Responses to the Capability Survey Part I and Part II must be received no later than the close of business on 23 November 2026. Please ensure data is in a readable electronic format that can be received through a firewall. Attachments shall not exceed 10 MB per email. Multiple emails are acceptable. Responses must…

Read the full notice and attachments on SAM.gov

Similar open bids

All open bids for NAICS 811210

From SAM.gov and USAspending.gov public data. BidCamel adds the buyer and award facts.

Save and get alerts